Pro X Ultra V2 Light Up. Win with Dual-Sensor Precision.

Starting From $249.00

What's new in V2?

Force and magnetic angle sensor assembly

INPUT CONTROL

Dual-Sensor
Fusion

All three pedals are equipped with force sensors and 15-bit angle sensors, with customizable fusion ratios.

Aluminum baseplate installed with wall supports

SETUP STABILITY

New CNC Aluminum
Baseplate

The new aluminum mounting baseplate can be paired with wall supports and anti-slip floor accessories, making it ideal for desktop sim racers.

Optional upgrade
Upgraded control box electronics

CONNECTIVITY

Upgraded
Control Box

Equipped with a 24-bit ADC and an RJ12 interface for connection to supported Fanatec and Thrustmaster wheelbases.

Pro X Ultra V2 pedal with its force and magnetic angle sensor assembly

01 / Enhanced Data Acquisition and Precision

Dual-sensor fusion.

Each pedal measures both pedal force and pedal angle simultaneously. Through SIMSONN Manager, you can freely adjust the weight of each sensor type in the final input.

Note: Requires SIMSONN Manager V 2.2.0 or later.

Six-channel
sensor matrix

3 pedals × 2 sensor types

Force sensing +
Magnetic angle sensing

Our proprietary sensor-fusion algorithm combines the stability of force sensing with the fast response of angle sensing. Through SIMSONN Manager, you can freely adjust the fusion ratio of the two sensor types, precisely balancing responsive pedal travel and stable force control to create a pedal experience tailored to your driving preferences.

02 / Brake Feel Customization

One brake, tuned to you.

Adjust the initial resistance, spring and elastomer combination, and hydraulic damping to tailor the brake feel to your preferences.

Pro X Ultra V2 brake preload nut adjustment
INITIAL RESISTANCE

Preload adjustment

Move the preload nut on the threaded rod to increase or decrease the initial force required to press the pedal.

Set how much force it takes to start pressing the brake.

Advanced setup: spring and elastomer combination examples

Using the Red (SOFT) Rubber Damper as an example, possible combinations of the Rubber Damper and Spring are as follows:

Note: Select Angle sensor

Plus X V2 — High-performance Car / Supercar

03 / CUSTOM ADJUSTMENT

Multi-dimensional
custom adjustment

First, adjust pedal position, travel and angle for greater comfort. Then fine-tune the mechanical resistance of the throttle and clutch to suit your driving style.

ALLPEDALS

Pro X Ultra V2 pedal face height adjustment
FRONT2 positions

15 mm hole spacing.

REARFine adjustment

Fine-tune the pedal face position.

Available on the throttle, clutch and brake pedals.

04 / SOFTWARE & CONNECTION COMPATIBILITY

Professional-grade control software

The proprietary SIMSONN Manager software allows real-time monitoring of pedal status and provides adjustment options for output curves, dead zones, and other parameters. The latest version adds sensor output ratio adjustment and supports multiple telemetry features.

Requires SIMSONN Manager V 2.2.0 or later.
Fully supports SimHub software.

Next-Generation
Enhanced Control Box

The hardware and architecture have been comprehensively upgraded, with an additional 24-bit independent ADC acquisition chip delivering raw data with 16.77 million levels of signal resolution for a smoother, more seamless driving experience.

Multiple new interfaces support third-party wheelbases and other devices, unlocking more possibilities.

Pro X Ultra V2 control box showing dual processors and sensor interfaces

Closed metal housing with enhanced EMI protection

32-bit / 120 MHz
Dual-processor chip

Supports VAM series vibration assistance modules

Interface
  • Pressure Sensor Interfaces ×3 (RJ45-8P8C)
  • Angle Sensor Interfaces ×3 (RJ12-6P6C)
  • Wheelbase Interface ×1 (RJ12-6P6C)
  • Third-Party Device Interface ×1 (RJ12-6P6C)
  • Vibration Assistance Module Interfaces ×3
  • Type-C Interface ×1
  • Upgrade Button ×1
  • Ground Terminal ×1
  • Vibration Assistance Module Power Interface ×1
  • Vibration Assistance Module Power Indicator ×1
  • Chip Status Indicator Lights ×2

05 / CONSTRUCTION

Precision and Robust Construction

Craftsmanship upgrades

Smoother surfaces and rounded edges replace the previous generation’s brushed finish for a more refined feel.

Exploded Pro X Ultra V2 pedal layers with their four surface treatments identified
  1. Powder Coating (Pedal Face Only)
  2. Electrophoresis
  3. Sandblasting
  4. Laser Cutting / Magnetic Polishing

06 / OPTIONAL ACCESSORIES

Extensive
Expansion Options

Add feedback. Build stability.
Extend your Pro X Ultra V2 setup with optional vibration modules and support accessories.

PRO X ULTRA V2 / VAM SERIES
Pro X Ultra V2 pedal with its force and magnetic angle sensor assembly

01 / VIBRATION FEEDBACK

Feedback you can feel.

Optional VAM Series vibration modules provide enhanced feedback through your pedals, helping you perceive more information during critical moments.

VAM Neo Throttle

Composed of a CNC aluminum alloy housing and a linear vibrating motor, it offers a higher adjustable frequency and more delicate vibration feedback.

More suitable for the throttle pedal.

VAM Pro Brake

Composed of a CNC aluminum alloy housing and a linear vibrating motor, it provides stronger thrust and a more direct vibration experience.

More suitable for the brake pedal.

VAM2 Clutch

It features a CNC-machined aluminum alloy housing with a built-in rotary vibration motor. Compared to the VAM, it offers quieter operation and superior heat dissipation.

More suitable for the clutch pedal.

02 / SETUP STABILITY

Support for your setup.

Optional base plate and wall support kits.

Pro X Ultra V2 pedal with its force and magnetic angle sensor assembly

BASE PLATE KIT

Aluminum Alloy
Base Plate Kit

An optional Aluminum Alloy Base Plate Kit is available, providing enhanced stability during intense driving while accommodating different setups, including hard floors and carpeted surfaces.

Pro X Ultra V2 pedal with its force and magnetic angle sensor assembly

WALL SUPPORT KIT

Wall
Support Kit

The optional Wall Support Kit braces your pedal setup against a wall to enhance overall stability.

Requires the Base Plate Kit.

More official accessories will continue to be released in the future.

07 / ARGB LIGHTING

Argb dynamic lighting system

Each pedal and the Heel Plate features an ARGB dynamic lighting system. The LED strip assembly has been comprehensively upgraded, delivering more vivid colors and improved lighting uniformity.

Lighting modes and effects can be customized in SIMSONN Manager.

SIMSONN Manager lighting settings for Pro X Ultra V2 pedals

08 / BEFORE YOU BUY

Before you buy, a few things to know.

Understand adjustment options, device compatibility, optional accessories and kit configurations before you order.

What's new in V2 compared with the previous generation?

V2 introduces pressure and angle sensor fusion, an upgraded control box, improved mounting options, and expanded connectivity. These upgrades provide more precise pedal input control, greater customization, and better compatibility with different sim racing setups.

How do I adjust brake sensitivity and calibrate the pedals?

Use SIMSONN Manager to calibrate pedal inputs and adjust response curves, dead zones, and sensor fusion ratios.
For physical brake feel, you can also adjust spring preload and elastomer combinations to suit your preferred braking style.

Can I use these pedals with a wheelbase from another brand?

Yes. On PC, SIMSONN pedals connect independently via USB, allowing you to use them with wheelbases from different brands.

For PS5, PS4, or Xbox, a compatible Fanatec or Thrustmaster wheelbase and the appropriate RJ12 cable are required. Please confirm your wheelbase compatibility before ordering.

Do VAM Haptic Reactors work on PS5 or Xbox?

Yes, but with limited functionality. You can configure vibration triggers based on throttle and brake input percentages using our software on a PC. These pedal-input-based vibration effects can then be used on consoles. However, advanced telemetry-based feedback, such as ABS and traction control (TC), is only available on PC and is not supported on consoles.

Can I upgrade my existing SIMSONN pedals to V2?

Some V2 accessories are available separately, including the upgraded control box and CNC Baseplate. However, the control box alone does not add V2's new angle sensors to older pedals.

What warranty and after-sales support do you offer?

SIMSONN pedals come with a 2-year warranty, subject to our warranty terms.

If you experience any issues, our support team can assist with troubleshooting, repairs, and replacement parts.

Contact us at [support@simsonn.com](mailto:support@simsonn.com) for assistance. Choose the number of pedals, compatible upgrades and optional accessories on the

Where will my order ship from, and how long will delivery take?

We ship from our warehouses in the United States, Germany, and China, depending on your location and product availability.

Standard delivery typically takes 5–12 business days after dispatch, depending on the destination and shipping method. You'll receive a tracking number once your order ships.

For pre-order products, please refer to the estimated shipping date shown on the product page.

SIMSONN Manager 2.2.0 pedal settings with clutch, brake and throttle sensor ratios