SIMSONN VAM Series — Pedal Haptic Reactors
Precision Built
Premium aluminum housing encases a high-speed eccentric motor,
delivering quiet operation and efficient cooling even at peak vibration.
VAM Series
Vibration Auxiliary Module
Accurately replicating the physical sensations of real racing cars, to deliver a truly
immersive and realistic tactile experience.
Vibration Module
Comparison
VAM Neo
39.6 * 39.6 * 49.4 mm
Aluminum Alloy
Linear Voice Coil Motor
Frequency Adjustment
Supported
Force Adjustment
232g
24V Power Adapter
Suitable for Throttle Pedal
VAM2
38 * 38 * 54 mm
Aluminum Alloy
Eccentric Rotating Mass Motor
Frequency Adjustment
not Supported
Force Adjustment
190g
24V Power Adapter
Suitable for Clutch Pedal
VAM Pro
46 * 46 * 72 mm
Aluminum Alloy
Linear Voice Coil Motor
Frequency Adjustment
Supported
Force Adjustment
477g
24V Power Adapter
Suitable for Brake Pedal
VAM
44 * 44 * 55 mm
Plastic
Eccentric Rotating Mass Motor
Frequency Adjustment
not Supported
Force Adjustment
115g
24V Power Adapter
Suitable for Clutch Pedal
Telemetry
Configuration
SIMSONN Manager Software allows for precise adjustment of vibration frequency and intensity, enabling you to replicate the driving sensations of various vehicles.
When using telemetry with SIMSONN Manager, be sure to select the mode that matches the model of your vibration motor in the software to prevent damage to the device. We reserve the right to refuse warranty or after-sales service for any damage caused by selecting a mode that does not match your product.
Full Compatibility
with SimHub
SimHub telemetry vibration support
This product is now supported by SimHub, unlocking a wide range of parameter adjustments.
1.Requires SimHub version 9.9.2 or later.
2.Do not use SimHub and SIMSONN Manager simultaneously, as this may cause abnormal device operation.
Dimensions VAM haptic reactor dimensions and mounting holes
(Unit:mm)
SIMSONN VAM2 Motor Dimensions & Mounting Holes
All measurements in millimeters. The VAM2 vibration motor body measures 54×38mm with a 38×38mm round mounting face, secured by four M4 bolts on a 23mm hole pattern (15mm inner spacing). The compact cylindrical housing fits tight pedal rigs and pairs with SIMSONN adapter plates for bolt-on installation to throttle, brake, or clutch pedals.
VAM2 Dimensions and Mounting Holes
VAM2 Adapter Plates — Throttle, Brake & Clutch Mounting
All measurements in millimeters. Two adapter plates are included with the VAM2 for bolt-on mounting to your sim racing pedals: an L-shaped plate for the throttle and brake (63×42mm base, 19.4mm upright, nine Ø4.2mm holes), and a Z-shaped plate for the clutch (87.5×42mm, 20mm tab, ten Ø4.2mm holes). The pre-drilled hole patterns fit the included M4/M5 hardware for a rigid, flex-free mount.
for Throttle/Brake Pedals
for Clutch Pedal