Simsonn HS Pro Shifter the H/SQ Dual-Mode Racing Simulation Shifter View Detail

# SIMSONN Manager v2.1.9 Release Notes
## Software Updates
### Firmware Updates
- Improved progress reporting to reflect firmware flashing progress more accurately.
- When a device is in Flash mode, the version field now displays “Flash Mode” instead of the default version “2.0.0”.
- After an update completes, the actual version of the newly installed firmware is displayed correctly.

### Software Update Experience
- Fixed interface freezes and unresponsiveness while downloading update packages. Users can now cancel the update or scroll through the release notes during a download.
- The download button now displays “Downloading…” and is disabled while the download is in progress to prevent repeated clicks.
- Canceling an update no longer incorrectly triggers a “Download Failed” message.
- Release notes now open at the top.

### Force Feedback & Pedal Vibration
- Fixed an issue where the “Vibration Intensity (%)” setting had no effect. Vibration output now respects the intensity limit configured for each effect.
- Fixed an issue that incorrectly halved the default vibration intensity.
- Vibration frequency ranges now automatically match the motor type: 60–100 Hz for VAM / VAM2, 10–200 Hz for VAM Neo, and 10–50 Hz for VAM Pro. When switching motor types, out-of-range frequency settings are automatically adjusted to the valid range.
- The displayed motor type (VAM / VAM2 / VAM Neo / VAM Pro) now matches the information reported by the device firmware and refreshes automatically when a device is connected or disconnected.
- Fixed an issue where changing the handbrake motor type sent an incorrect motor type to the device.
- Stop commands are no longer sent repeatedly when there is no vibration output, reducing communication overhead.
- Vibration now stops immediately when the game is paused.
- Telemetry transmission to the device is stopped when saving a configuration to prevent data errors.
### Game Detection
- Fixed an application crash related to rFactor 2.

### Pedal Presets & Interface
- Fixed an issue where the `proxUltraV1.5` default preset turned off the lighting.
- Changed the version text on the pedal interface to white for improved readability.

## Device Firmware Updates
### Interface Data Refresh
- Fixed an issue where data for Plus X and ProX Ultra pedals failed to refresh in SIMSONN Manager even though pedal signals and telemetry were operating normally.

### Vibration Feedback
- Improved the VAM / VAM2 vibration algorithm with gradual intensity transitions as frequency changes, enhancing telemetry vibration feedback.
- Added adjustable frequency ranges of 60–100 Hz for VAM / VAM2 and 10–200 Hz for VAM Neo.

### Communication Stability
- Optimized the communication queue between the PC and the main controller to resolve unanswered queries.
- Improved communication between the main and sub-controllers, adding CRC validation to the sub-controller to reduce data errors and improve transmission stability and reliability.

# SIMSONN Manager v2.1.9 Release Notes
## Software Updates
### Firmware Updates
- Improved progress reporting to reflect firmware flashing progress more accurately.
- When a device is in Flash mode, the version field now displays “Flash Mode” instead of the default version “2.0.0”.
- After an update completes, the actual version of the newly installed firmware is displayed correctly.

### Software Update Experience
- Fixed interface freezes and unresponsiveness while downloading update packages. Users can now cancel the update or scroll through the release notes during a download.
- The download button now displays “Downloading…” and is disabled while the download is in progress to prevent repeated clicks.
- Canceling an update no longer incorrectly triggers a “Download Failed” message.
- Release notes now open at the top.

### Force Feedback & Pedal Vibration
- Fixed an issue where the “Vibration Intensity (%)” setting had no effect. Vibration output now respects the intensity limit configured for each effect.
- Fixed an issue that incorrectly halved the default vibration intensity.
- Vibration frequency ranges now automatically match the motor type: 60–100 Hz for VAM / VAM2, 10–200 Hz for VAM Neo, and 10–50 Hz for VAM Pro. When switching motor types, out-of-range frequency settings are automatically adjusted to the valid range.
- The displayed motor type (VAM / VAM2 / VAM Neo / VAM Pro) now matches the information reported by the device firmware and refreshes automatically when a device is connected or disconnected.
- Fixed an issue where changing the handbrake motor type sent an incorrect motor type to the device.
- Stop commands are no longer sent repeatedly when there is no vibration output, reducing communication overhead.
- Vibration now stops immediately when the game is paused.
- Telemetry transmission to the device is stopped when saving a configuration to prevent data errors.
### Game Detection
- Fixed an application crash related to rFactor 2.

### Pedal Presets & Interface
- Fixed an issue where the `proxUltraV1.5` default preset turned off the lighting.
- Changed the version text on the pedal interface to white for improved readability.

## Device Firmware Updates
### Interface Data Refresh
- Fixed an issue where data for Plus X and ProX Ultra pedals failed to refresh in SIMSONN Manager even though pedal signals and telemetry were operating normally.

### Vibration Feedback
- Improved the VAM / VAM2 vibration algorithm with gradual intensity transitions as frequency changes, enhancing telemetry vibration feedback.
- Added adjustable frequency ranges of 60–100 Hz for VAM / VAM2 and 10–200 Hz for VAM Neo.

### Communication Stability
- Optimized the communication queue between the PC and the main controller to resolve unanswered queries.
- Improved communication between the main and sub-controllers, adding CRC validation to the sub-controller to reduce data errors and improve transmission stability and reliability.

# SIMSONN Manager V2.1.8 Release Notes
## Software Updates
### New Features
* **New Telemetry System**: Added telemetry support for multiple games, along with a variety of new telemetry effects for richer and more intuitive driving feedback.
* **New Telemetry Control Interface**: Redesigned the telemetry control interface to make effect configuration and adjustment more intuitive and convenient.
* **Support for New Hardware Revisions**: Added device recognition and default configuration support for new hardware revisions of Plus X and Pro X Ultra. Different hardware revisions retain the same product names and provide a consistent experience in SIMSONN Manager. * **Telemetry-Linked Lighting**: Added real-time lighting feedback for driving states such as ABS, TC, DRS, flags, and more, allowing device lighting to reflect in-game vehicle status. * **Motor Signal Notifications**: Added motor signal notification pop-ups to help users confirm telemetry and vibration motor activity.

### Improvements & Bug Fixes
* **Improved Firmware Update Interface**: Refined the firmware flashing interface and workflow for a clearer and more convenient update experience. * **Improved Resolution Scaling**: Further optimized UI scaling and layout across different screen resolutions and display environments. * Fixed occasional application crashes and silent update failures during firmware flashing, improving update reliability. * Fixed an issue where the lock screen could become unresponsive to clicks under certain conditions. * Fixed an occasional issue where the updater could fail to correctly replace the existing application, improving the stability of the software update process. * Made multiple UI, performance, and stability improvements to reduce application errors and crashes.
---
## Firmware Updates
### New Features & Improvements
* **Improved Plus X and Pro X Ultra Game Compatibility**: Changed pedal output axes from X/Y/Z to Rx/Ry/Rz to improve device recognition and axis-binding compatibility in games, with added support for *Forza Horizon 6*. * **Improved Pedal Signal Filtering**: Further reduced input signal fluctuations for smoother and more stable pedal data, providing more precise pedal control. * **Improved VAM Neo / VAM Pro Vibration Control**: Refined vibration frequency and intensity control algorithms for more stable frequency output, more precise intensity adjustment, and improved telemetry feedback. * **Improved Main/Sub-Controller Communication**: Enhanced data transmission stability and communication reliability between the main and sub-controllers. * **Improved Pedal Calibration Workflow**: Removed the standalone Offset function and integrated zero-point and travel-range setup into the calibration process, simplifying pedal setup and configuration.

# SIMSONN Manager V2.1.8 Release Notes
## Software Updates
### New Features
* **New Telemetry System**: Added telemetry support for multiple games, along with a variety of new telemetry effects for richer and more intuitive driving feedback.
* **New Telemetry Control Interface**: Redesigned the telemetry control interface to make effect configuration and adjustment more intuitive and convenient.
* **Support for New Hardware Revisions**: Added device recognition and default configuration support for new hardware revisions of Plus X and Pro X Ultra. Different hardware revisions retain the same product names and provide a consistent experience in SIMSONN Manager. * **Telemetry-Linked Lighting**: Added real-time lighting feedback for driving states such as ABS, TC, DRS, flags, and more, allowing device lighting to reflect in-game vehicle status. * **Motor Signal Notifications**: Added motor signal notification pop-ups to help users confirm telemetry and vibration motor activity.

### Improvements & Bug Fixes
* **Improved Firmware Update Interface**: Refined the firmware flashing interface and workflow for a clearer and more convenient update experience. * **Improved Resolution Scaling**: Further optimized UI scaling and layout across different screen resolutions and display environments. * Fixed occasional application crashes and silent update failures during firmware flashing, improving update reliability. * Fixed an issue where the lock screen could become unresponsive to clicks under certain conditions. * Fixed an occasional issue where the updater could fail to correctly replace the existing application, improving the stability of the software update process. * Made multiple UI, performance, and stability improvements to reduce application errors and crashes.
---
## Firmware Updates
### New Features & Improvements
* **Improved Plus X and Pro X Ultra Game Compatibility**: Changed pedal output axes from X/Y/Z to Rx/Ry/Rz to improve device recognition and axis-binding compatibility in games, with added support for *Forza Horizon 6*. * **Improved Pedal Signal Filtering**: Further reduced input signal fluctuations for smoother and more stable pedal data, providing more precise pedal control. * **Improved VAM Neo / VAM Pro Vibration Control**: Refined vibration frequency and intensity control algorithms for more stable frequency output, more precise intensity adjustment, and improved telemetry feedback. * **Improved Main/Sub-Controller Communication**: Enhanced data transmission stability and communication reliability between the main and sub-controllers. * **Improved Pedal Calibration Workflow**: Removed the standalone Offset function and integrated zero-point and travel-range setup into the calibration process, simplifying pedal setup and configuration.

# SIMSONN Manager
v2.1.7 Release Notes

## Software Updates

### New Features
* Added support for HS Pro V2 devices.
* Added real-time pedal telemetry graphs for monitoring pedal input data.
* Added Auto Blip functionality in the shifter interface, compatible with SIMSONN pedals. * Added Throttle Cut functionality in the pedal interface to improve heel-and-toe driving techniques.

### Improvements
* Improved UI responsiveness and reduced lag when dragging windows and controls.
* Optimized startup procedures to reduce software launch time.
---

## Firmware Updates

### Enhancements
* Updated firmware for HS Pro V2 devices with improved lighting telemetry performance.
* Added Auto Blip and Throttle Cut support for PlusX and ProX Ultra pedals.

### Bug Fixes
* Improved Offset button responsiveness and reliability.
* Fixed an issue where the sub-controller firmware version could display incorrectly after firmware updates.
* Fixed a rare USB device recognition issue affecting a small number of users.

# SIMSONN Manager
v2.1.7 Release Notes

## Software Updates

### New Features
* Added support for HS Pro V2 devices.
* Added real-time pedal telemetry graphs for monitoring pedal input data.
* Added Auto Blip functionality in the shifter interface, compatible with SIMSONN pedals. * Added Throttle Cut functionality in the pedal interface to improve heel-and-toe driving techniques.

### Improvements
* Improved UI responsiveness and reduced lag when dragging windows and controls.
* Optimized startup procedures to reduce software launch time.
---

## Firmware Updates

### Enhancements
* Updated firmware for HS Pro V2 devices with improved lighting telemetry performance.
* Added Auto Blip and Throttle Cut support for PlusX and ProX Ultra pedals.

### Bug Fixes
* Improved Offset button responsiveness and reliability.
* Fixed an issue where the sub-controller firmware version could display incorrectly after firmware updates.
* Fixed a rare USB device recognition issue affecting a small number of users.

**Simsonn Manager v2.1.6 Changelog**
**[UI Improvements]**
* Adaptive resolution: Window size now automatically scales to approximately 70% of the current screen resolution for better usability across different displays
**[Bug Fixes]**
* Fixed an issue where the application could crash when launching LMU
**[Game Support]**
* Updated AC EVO telemetry system to version 0.6, supporting telemetry data from the latest AC EVO version
**[Calibration Improvements]**
* Brake calibration optimized: Minimum effective braking force adjusted to 6kg, with more accurate calibration guidance

**Simsonn Manager v2.1.6 Changelog**
**[UI Improvements]**
* Adaptive resolution: Window size now automatically scales to approximately 70% of the current screen resolution for better usability across different displays
**[Bug Fixes]**
* Fixed an issue where the application could crash when launching LMU
**[Game Support]**
* Updated AC EVO telemetry system to version 0.6, supporting telemetry data from the latest AC EVO version
**[Calibration Improvements]**
* Brake calibration optimized: Minimum effective braking force adjusted to 6kg, with more accurate calibration guidance

1. Software Updates
Updated the software startup animation.
Optimized default device presets to improve the initial user experience.
2. Display & Interface
Fixed display issues on high-resolution (High DPI) screens to improve UI scaling and compatibility.
3. Firmware Update
ProX Ultra
CPU1: v2.0.7
CPU2: v2.0.5
4. Fixes & Improvements
Improved stability of ProX and ProX Ultra in lighting Follow mode.
Fixed an issue where vibration could be interrupted in this mode.
Resolved a problem where missing vibration start or stop commands could cause vibration to not start or fail to stop.

1. Software Updates
Updated the software startup animation.
Optimized default device presets to improve the initial user experience.
2. Display & Interface
Fixed display issues on high-resolution (High DPI) screens to improve UI scaling and compatibility.
3. Firmware Update
ProX Ultra
CPU1: v2.0.7
CPU2: v2.0.5
4. Fixes & Improvements
Improved stability of ProX and ProX Ultra in lighting Follow mode.
Fixed an issue where vibration could be interrupted in this mode.
Resolved a problem where missing vibration start or stop commands could cause vibration to not start or fail to stop.

CPU1:2.0.7 CPU2:2.0.5，Fixed the issue of RGB Follow mode interfering with the pedal vibration signal.